Articles in this section

Assessment Performance Levels

Avatar
Kallen Bakas
Updated
Follow

Performance Levels are an optional component when setting up an assessment. Depending on the type of assessment you are building and how you plan to analyze scores, assessment performance levels can be helpful in interpreting assessment data.

This article covers the various options for Performance Level Setup.

An assessment cannot be published until all steps in the assessment breadcrumb are checked.

If you do not plan to include Performance Levels for your assessment you can do so, but you must cycle through all the assessment Setup screens and click the Next button on the Performance Level screen to register the breadcrumb green check prior to publishing your assessment.

Performance Level Setup

Performance levels are optional. If available, you can use an existing template, or customize performance levels as desired. Performance levels help users to interpret their assessment data in reports.

  1. Load from Available Templates - Click here to use a template previously uploaded by the District Template Manager, as determined by permission from the district administrator.
  2. Add Performance Level Sets - Click here to include up to 2 additional performance level sets.
  3. Skip Performance Level - Click here if you do not want to add performance levels. A message will appear confirming this action. Click OK to go to the next step.
  4. Add Performance Level - Click here to manually create performance levels.

 

Load from Available Templates

  1. Click Load from Available Templates.
  1. Scroll through the existing templates and select the one you wish to use by clicking on Apply this Template.
  1. The template will appear in the Performance Level step.
  1. You may edit the template by deleting levels, renaming the levels, changing colors, changing the “Percentage From” values, setup levels by Cut Points instead of by Percentage.

 

Add Performance Level Sets

(Optional) Click here if more than one set of Performance Levels is desired. For example, one set may be by performance descriptors and one set may be by alphabetical grades. A maximum of three Performance Level sets may be created. A minimum of two sets are needed to enable this feature.

  1. Click on Add Performance Level Sets
  1. The first set will appear under an orange tab. Two new tabs will show Set 2 and Set 3.
  1. Click on the Performance Level Set 2 tab. Repeat the same process for the second set by either loading from available templates, or creating custom performance levels.

Repeat for Performance Level Set 3.

  1. To delete Set 3, click on the x in the upper right corner of the tab. An alert message will appear. Click Delete or Cancel.
  1. To delete Set 2, click on the x in the upper right corner of the tab. A different alert message will appear. Deleting all performance levels will NOT delete Set 1.

 

Customize Performance Levels

You may choose to create your own performance levels by percentage instead of using an existing template, or to modify an existing template.

  1. Click on Add Performance Level for each new performance level you wish to include. Beginning with the lowest level, enter the level number, description, and color code.
  2. Setup Performance Levels by Percentage: Select which level corresponds with proficient and enter the desired percentage correct for proficient and above.
  3. The cut points will be automatically calculated as determined by the total points possible.
  1. Setup Performance Levels by Cut Points: If you prefer to set up the performance levels by cut points instead of percentage, then select Cut Points, and enter the desired cut points for each level. The percentages will be automatically calculated.
  2. Previous, Save and Next - Click Next after you have made all your selections and you wish to continue with your assessment creation. If you are done with your selections and wish to exit the system click the Save button before exiting. If you want to go back to a previous step, click on Previous.

Comments

0 comments

Article is closed for comments.